Description
The BETE UltiMist® UM series is completely in plastic (polyacetal) with a 1/8″ male thread connection. The nebulizer produces a large number of drops below 60 microns. Nebulizers create a very fine mist or fog. Droplets are typically small enough that their buoyancy is significant compared to gravity, allowing droplets to appear to float. In the absence of upward airflow, particles are simply falling very slowly.
Spray pattern
- Very fine mist
- Large part of droplets below 60 micron
Application
- Humidification
Flow rate
- 2.5 l/min to approx. 32 l/min
Spray angle
- 90° hollow cone
Materials
- Brass / 416, Polyacetate
Connection type
- Pipe (1/8,1/4)
- Connection methods: Thread (NPT, BSP, Male, Female)
